This class will showcase the Piedmont Atlanta Hospital Marcus Tower expansion and the all-in virtual design involvement on this project. We'll explain how to utilize models and BIM Team/C4R for Revit's cloud-based products and services for multiple aspects of the project, including the involvement in preconstruction for marketing, estimating, and self-perform opportunities; the integration of drone flights and parametric, in-house crane models for site logistics and safety planning; virtual reality for headwall mock-ups; and structural review. We'll complete the discussion with lessons learned for workflow, full-team integration, and training for the all-in approach.
Contessa Hayter graduated from Auburn University College of Architecture, Design, and Construction with a Bachelor of Science degree in building science. After gaining valuable experience in the field as a project engineer, Hayter joined Brasfield & Gorrie as an estimator on healthcare, commercial, and self-perform projects. As a senior virtual design and construction coordinator in Brasfield & Gorrie’s Virtual Design + Construction (VD+C) Group, Hayter specializes in total-project integration of 3D modeling from preconstruction through completion, focusing on self-perform work and virtual site logistics for safety planning. A green building enthusiast whose projects span all market sectors, Hayter is passionate about the transformative potential of sustainability. When she isn’t working, she maintains and spreads her positive energy as a dedicated yoga teacher and travel aficionado.
Kelly Orji is a licensed architect with 8 years of experience and a passion for architecture as well as healthcare design in-particular. She graduated with a Bachelor of Arts in Architecture from the University of New Mexico as well as an M.Arch degree (healthcare focus) from Georgia Institute of Technology. Since graduating, she has worked as a project architect for HKS, Inc. in Atlanta. She has participated in multiple aspects of the process taking projects from the programming/conceptual phase all the way through to construction documents and construction administration. In addition to her penchant for healthcare projects, Kelly has a passion for improving efficiency and utilizing digital tools to advance the design workflow and improve the project process.
Graham Sinclair graduated from Clemson University with a Bachelor of Arts in Architecture and later attended University of Kansas for a Masters of Architecture with a specialty in healthcare. After working several years as an architect in California, Graham joined HKS as a project architect in Atlanta with a focus on healthcare projects. In his role as project architect, Graham oversees each phase of development from preliminary design through the construction document phase. He works directly with the client in coordinating the efforts of the project team and consultants throughout each phase of project development. He works closely with stakeholders to translate their vision and goals into successful projects.
Many projects, much return! Corgan has made a large investment in Collaboration for Revit cloud service and BIM 360 Team and Fusion Team (formerly A360 Team)-and it's paid off! Many of the firm's partners are working together to simultaneously access data while maintaining firm individuality and capitalizing on connections to their corporate infrastructure. This proposal will discuss Corgan's use of BIM 360 Team and Fusion Team and Collaboration for Revit on many projects, including Los Angeles International Airport's Midfield Satellite Concourse, work at Chicago's O'Hare International Airport, multiple data-center projects, and smaller corporate office building renovations-with a focus on staff management, model management, and consultant management. We'll cover why we chose BIM 360 Team and Fusion Team and Collaboration for Revit, how we set up BIM 360 Team and Fusion Team and Collaboration for Revit, how we structure the models in the cloud, how to execute large and small projects in the cloud, and what the benefits are of multiple-office collaboration.
Airport design necessitates collaboration between numerous teams with a wide range of skill sets generally coming from various locations. This requires well-established strategies and methodical use of tools and technologies for a successful delivery of a large-scale project. This session will present strategies for utilizing cloud collaboration tools such as Collaboration for Revit, BIM 360 Team and Fusion Team (formerly A360 Team), BIM 360 Glue software, and BIM 360 Docs software in order to help teams communicate and collaborate effectively in delivering a complex project. We will showcase San Francisco's $2.4 billion International Airport project as an example of utilizing these strategies to enable effective collaboration between more than 200 architects, engineers, and builders from Woods Bagot, HKS Architects, Gensler, and numerous core trades and consultants on this design-build project. This session will present Building Information Modeling (BIM) strategies for cloud collaboration and data management on airport projects.
This class is for anyone who is currently using Building Information Modeling (BIM) or intends to utilize it on large-scale projects in the future. This will be immensely helpful, inspirational, and thought provoking for owners and all stakeholders to make the best utilization of BIM on large-scale projects.
Tired of waiting for the architect or the structural engineer to send you the last updated model so you can continue your work? The waiting time is over-and it's called Collaboration for Revit cloud service. This session will demonstrate how architects, engineers, and contractors have been using the cloud to communicate and collaborate in designing and currently building Norway's biggest shopping center. Using collaboration for Revit software, BIM 360 Team software, and the Forge platform to view 3D models, it has been possible to identify and solve problems more quickly than in a traditional design process. Workflows, tips, and tricks will be essential in this lecture.
When a progressive health-care client challenged an integrated project delivery team to look for opportunities to enhance collaboration and meet stringent deadlines on a new hospital project in California, the team started investigating several options to enhance coordination among the different teams' model files. After reviewing the available alternatives, and after careful consideration, the team finally selected Collaboration for Revit cloud service. Collaboration for Revit exceeded the expectations of the team members who were not only co-located at a trailer, but were also dispersed in several offices-including overseas. The team was able to work efficiently without restrictions on firewalls, which also enabled for unique workflows between the design and construction teams. In this class, we'll go over this success story while reviewing the key features of Collaboration for Revit, the selection process, setup, tips/tricks, and known limitations. Additionally, we'll look at how BIM 360 software and Collaboration for Revit were used to enhance change management.
Collaboration for Revit cloud service has fundamentally changed the way the architecture, engineering, and construction industry works on complex projects that require collaborative workflows. This class will focus on explaining the concept of Collaboration for Revit. We'll demonstrate the fundamentals of using collaborative workflows using Collaboration for Revit, and illustrate how multiple stakeholders can work on the same model in the cloud. My co-speaker-the national Building Information Modeling (BIM) manager of a large architectural firm-will explain how their company used Collaboration for Revit to deliver complex projects on time and on budget using real collaboration on the firm's Revit models.
Collaboration is the key to project success. Waste and inefficiency is expected in the transition of information from design team to trade partners. In this class, we'll share our experience of moving the fabrication drawings left into the design phase using a unified workflow on a traditional design-build project. With this workflow, we minimize the waste in transition and create a more efficient and leaner process. We'll identify the advantages of a unified workflow in the design phase and how it benefits the project team and the owner. We'll also review the process and software used to achieve this collaboration-we used Collaboration for Revit cloud service and BIM 360 Team software as the collaboration platform for the project, in conjunction with BIM 360 Glue software for coordination and design review during the construction document phase. We'll share our feedback and lessons learned, along with any tips and work-arounds to help with the use of Collaboration for Revit and BIM 360 Team and Fusion Team (formerly A360 Team) for interdisciplinary collaboration.
With the goal of providing the best patient care at lowest cost, Mercy (one of the top five U.S. health systems) selected our Team for Project Delivery. Coupled with traditional A/E Design, we are also in charge of developing and managing VDC workflows aimed at shortening the Schedule, reducing Cost, and optimizing Turn-over. We developed Enhanced Integration (EI), aiming to connect the entire Lifecycle.<br/><br/>In addition to managing VDC workflows, EI also includes Asset Data Management, targeting an IWMS (Integrated Workplace Management System) implementation. With more than 2,000 employees across all Mercy support departments using the unified platform, the projected operational savings are staggering.<br/><br/>EI has evolved over 3 years and 8 projects totaling more than $500 Million in Construction. This class will focus on best practices for delivering complex healthcare projects and showcase BIM360 Team and Collaboration for Revit as the main tools for connecting the entire Project Team.
The global architecture, engineering, and construction industry could benefit from better adherence to standards. Many data standards exist, but few succeed. Who mandates the standard? Owner? Architect? Government? Representatives from ConstructionProgress.org and Construction Open Standards Alliance (COSA.build) will kick off this roundtable discussion with a brief overview of the current Building Information Modeling (BIM) and construction data standards available today (in the United States and abroad). After defining the available data standards, the group will debate the relative adoption rates of these standards in the real world. The intended outcome is not to solve the technology barrier. Instead, it is to overcome the people and process barriers to digital collaboration. This roundtable debate will produce key opportunities to impact digital-standards adoption at the individual or company level.
The demanding pace in the design industry for faster collaboration with outside consultants, and the need to provide multiple resources from different office locations, is making it necessary to find quicker and more-efficient solutions to resolve those demands. With 180 Collaboration for Revit licenses in place, McMillan Pazdan Smith Architecture has taken its design workflow to a different level. Hear about the company's workflow from the initial Building Information Modeling (BIM) kick-off meeting, to the daily unexpected glitches with Collaboration for Revit-and what is required on each of the firm's projects.
Work sharing is commonly known by Revit users and is critical when it comes to collaborative design. Obviously, with collaboration comes communication. The more dispersed teams are, the more important efficient communication becomes. In this session, we'll discuss how the next-gen Revit work sharing can help teams to understand design changes, no matter where team members are. We'll not only look at how designers update their team members about changes, but also how these changes are communicated to external stakeholders in a controlled way and how we can visualize these design changes in 3D. Finally, we'll explain how you can collect feedback from non-Revit users, and how you can create deliverables using Dynamo software. The core of this process is BIM 360 software, which we'll also briefly discuss.
Following a 12-year planning period, HOK was commissioned with the design of the Salt Lake City International Airport in Utah, considered one of the largest aviation projects under construction in the United States. In 2017, the airport launched a new 740,000-square-foot concourse expansion to the ongoing project, bringing the total area to 2.3 million square feet, with a total construction cost to $2.8 billion. This provided HOK with the opportunity to realign its BIM Execution Plan with a brand-new set of design technologies supporting big data, including A360 Collaboration for Revit cloud service, FormIt 360 software, Dynamo Studio software, Revizto, and Enscape. Learn how HOK re-evaluated, strategized, and adopted new technologies to enhance the collaborative design process; and hear what hurdles and opportunities appear when the cloud is pushed to the limits by projects of colossal dimensions.